Cancel

Raw 12 volt

(No Reviews)
3 Bilby Ct, Nambour QLD 4560, Australia

Raw 12 volt is located in Sunshine Coast Regional of Queensland state. On the street of Bilby Court and street number is 3. To communicate or ask something with the place, the Phone number is 0498 987 996. You can get more information from their website.
The coordinates that you can use in navigation applications to get to find Raw 12 volt quickly are -26.6410645 ,152.9571175

Contact and Address

Address: 3 Bilby Ct, Nambour QLD 4560, Australia
Postal code: 4560
Phone: 0498 987 996
Website: http://www.raw12volt.com.au/

Opening Hours:

Monday:9:00 AM – 4:30 PM
Tuesday:9:00 AM – 4:30 PM
Wednesday:9:00 AM – 4:30 PM
Thursday:9:00 AM – 4:30 PM
Friday:9:00 AM – 4:30 PM
Saturday:Closed
Sunday:Closed

Location & routing

Get Directions

Reviews

There are no reviews yet!
You can review this Business and help others by leaving a comment. If you want to share your thoughts about Raw 12 volt, use the form below and your opinion, advice or comment will appear in this space.

Write a Review


Raw 12 volt On the Web

RAW 12 Volt - Business Service - Nambour, Queensland | Facebook...

RAW 12 Volt - 3 bilby court, Nambour, Queensland 4560 - Rated 5 based on 6 Reviews "Rohan made me all the cables to run my Waeco off a 2nd battery from... +61 498 987 996. Contact RAW 12 Volt on Messenger.


RAW 12 Volt - ადგილობრივი მომსახურება - Nambour, Queensland

RAW 12 Volt - 3 bilby court, Nambour, Queensland 4560 - Rated 5 based on 6 მიმოხილვა "Rohan made me all the cables to run my Waeco off a 2nd battery... +61 498 987 996. Contact RAW 12 Volt on Messenger.


Raw 12 Volt - Raw 12 volt

12 volt Accessories for caravan's /camping . Here at RAW 12 volt we are the Stockist of the thunder range of products such as the 20 amp dc to dc battery chargers with solar input and much more.


Raw 12 volt clouds out of the turbo - YouTube

.55 ohms in the turbo on my 12 volt lipo box pushing just over 200 watts!


How do I convert raw 12 Volt AC to 12 Volt DC. I think we are

I think we are trying to use a half wave rectorfier and needing help finding a full wave rectorfier to compare. We are getting 5.9 to 6.3 volts from the AC source and not charging the 12 Volt batteries. None of the local automotive and electrical shops have been able to help.


How to get at least 12 vdc and 40 amps of current for under $40?

If you just want a raw 12 volt source, then such a unit would be just fine. If any smoothing is needed, put a large value capacitor across the output leads. You can wire two 5 volt supplies in series to get 10 volts, is that enough? I wouldn't recommend wiring two supplies in parallel to get more current.


The World's First DSLR Cameras - Created by Eastman Kodak Company

The power supply board on the left converts raw 12 volt battery power to the voltages needed for the CCD analog circuits. The board on the right holds the digital control EPLD that generates the CCD clocks, and the 8 bit A/D converter.