| Address: | 6 Ross Pl, Wetherill Park NSW 2164, Australia |
|---|---|
| Postal code: | 2164 |
| Phone: | 0404 721 721 |
| Website: | http://www.f721.com/purchasecontact.html |
There are no reviews yet!
You can review this Business and help others by leaving a comment. If you want to share your thoughts about f 721 sealer, use the form below and your opinion, advice or comment will appear in this space.
F-721 Concentrated Sealer. F-721™ Premium Fluoropolymer Sealer CONCENTRATE is a unique no-sheen, penetrating sealer for most mineral based surfaces. No other sealer fights stains better! Plus it can be used as either a SOLVENT BASED or WATER BASED sealer. Diluted with water, it is a low odor, low VOC sealer for moderate to very porous surfaces.
f 721 sealer is located in The Hills Shire of New South Wales state. On the street of Ross Place and street number is 6. To communicate or ask something with the place, the Phone number is 0404 721 721. You can get more information from their website.
f 721 sealer is located in City of Fairfield of New South Wales state. On the street of Ross Place and street number is 6. To communicate or ask something with the place, the Phone number is 0404 721 721. You can get more information from their website.
Diluted with water, it is a low odor, low VOC sealer for moderate to very porous surfaces. Diluted with alcohol it penetrates dense stone and previously sealed surfaces. Typical dilution ratio is 7:1 with clean water or alcohol (16 oz of F-721 ™ making 1 gallon of ready to use sealer). Dilution ratio can be adjust from 4:1 all the way to 19:1 ...
Since F-721™ begins to reject water as soon as it dries, a second coat with water dilution will only deposit more polymer on the surface and is not recommended.Multiple coats, though generally not required, must be done with alcohol diluted F-721™. Coverage Rates Depending on the porosity of the surface being sealed, 75 - 750 sq. ft. per gallon of diluted sealer.
F-721™ Premium Fluoropolymer Sealer CONCENTRATE is a unique no-sheen, penetrating sealer for most mineral based surfaces.No other sealer fights stains better! Plus it can be used as either a SOLVENT BASED or WATER BASED sealer. Diluted with water, it is a low odor, low VOC sealer for moderate to very porous surfaces. Diluted with alcohol it penetrates dense stone and previously sealed surfaces.
F-721™ Premium Fluoropolymer. F-721™ Premium Fluoropolymer. $46.95) No reviews yet Write a Review Write a Review ×. F-721™ Premium Fluoropolymer. Rating * Name Email * Review ...
Seal it really well with F-721 sealer, or MB-04, or Prosoco LMP Or if there is room to purchase a tool setup, you can use silicone carbide antiquing brushes. This will texture the limestone a little bit, which will still look nice, but it will help with slip resistance.
There are two basic families of good penetrating sealers; silane/siloxane and fluoropolymer. They both repel water and oil, but silanes are better at water and fluoro's are better at oil. There are water based and solvent based versions of each and of course different quality levels/price points. The first thing you need to decide is why are ...
Place a tiny amount of water on the surface and let it sit for 10-15 minutes. After that, wipe away the water to check if a darker mark remains. This indicates that the surface is loose and needs to be sealed. Any surface that is not meant to be touched should be covered or protected. With MB Stone Care MB-24 Barrier Impregnating Sealer, use a ...